10-Foot Wide Tiny Home by Nelson Tiny Houses

A popular trend in the world of tiny houses on wheels is to build the home 10-feet wide. While this is over the road limit of 8-feet, 6-inches, most people don’t move their tiny homes often and obtaining a temporary oversize load permit to move the house is usually not too hard to obtain.

The builder of this home is Nelson Tiny Houses, located in Nelson, British Columbia. The homes they build are always filled with beautiful custom woodwork and every detail carefully thought-through.  Subscribe to the Nelson Tiny Houses YouTube Channel for more videos from this tiny house builder.

[embedyt] https://www.youtube.com/watch?v=pN1lLdX6exU[/embedyt]

Video and image by Nelson Tiny Houses.

Dennis’ Tiny House on Wheels

Dennis had his 24-foot tiny house on wheels build by MitchCraft Tiny Homes in Fort Collins, Colorado. The structure is built with SIPs (structurally insulated panels).

SIPs are engineers panels that are typically built with custom dimensions for each project. Instead of framing the wall with 2x4s and plywood, the builder assembles the large panels and secures them together. In the case of a tiny house the floor, walls and roof can be made from SIPs.

This module form of construction can make a very sturdy and lightweight shell in a short amount of time. The cost may be higher than typical framing, but with the potential savings on labor it may actually end up being less expensive – depending on the project requirements.

Inside Dennis’ home you’ll find a full kitchen, living area, folding dining table, bathroom with composting toilet and stainless steel shower enclosure, two lofts, and stairs that double as storage.

On the exterior you’ll find wood siding and a corrugated steel roofing used as exterior wainscoting – which gives the house a nice horizontal banding effect. On top the house there’s a simple metal shed roof – ideal for adding headroom in the loft.

To learn more about this home’s builder visit MitchCraft Tiny Homes. Mitch runs a small company, but takes the time with each homeowner to design and build the house to their specifications and tastes. If you’re looking for a custom tiny home builder in Colorado, definitely check out this tiny home builder.

Follow Alexis & Christian on their Tiny House Expedition

Alexis Stephens & Christian Parsons, filmmaker duo & an ordinary couple embarking on an extraordinary expedition across the nation in a tiny house on wheels. The purpose: document tiny house community building projects across the nation and tell the story of how each came into being, the people behind them & how they are making a difference in their communities.” – Tiny House Expedition

Follow the Tiny House Expedition Blog and track Alexis & Christian’s journey.

Luke & Beatrice’s Tiny Home

The Melbourne resident was in Bendigo this week to attend the Homes For Change event on Thursday and to hear a talk on the tiny homes movement.Mr Florences trailer home is 2.2m by 2.8m and only partially built, but is well on the way to becoming his dream home.

Source: Homes for change: what a tiny house looks like. Photo by Jodie Wiegard. 

Westport – Tiny House on Wheels Plans

Pictured here are some photo realistic renderings of the Westport – formerly known as the Coast Cottage. It’s a 28-foot tiny house design that features two rooms separated by a bathroom & kitchen. Above the kitchen & bath is a sleeping loft. Off the back room is a french door. In these illustrations I show that back room used as a dining room but you can configure this house to meet your needs. To learn more visit Tiny House Design and preview all my designs.